Company logo
Please Install Flash Player
Download from here

Products


Crack-S
Products   • Construction Material    • Crack-S
Crack-S
Waterbone acrylic copolymer based caulking compound is a correct solution for conventional oil mastics, cold and hot bitumious, butyl, neoprene rubber based caulks. Crack - S is easy to extrude and apply. No solvent vapours, no heating hence no pollution. Water based dirdrying caulk, no external cauring is required. Nontoxic & nonhazardous to the applicator and environment. On drying forms tough, flexible, rubbery mass, withstand the limited linear movements of the structure.Suitable for caulking glazing of nonmasing construction joints and nonmoveing strucal cracks -interior & exterior.

END USES Sealing of construction joints upto 10 mm. Door & window frame joints. Wash basin, tile, bathtub joints. Glasspane fixing. Structural (nonmoving) cracks from interior & exterior.

Technical Characteristics


Nature One pack.
Appearance & colour Thixotropic, nonsang, smooth & soft white paste.
Consistency Viscous paste.
Sp. Gravity at 30° C.1.45 + 0.05
Surface dry time at 25°C.10 - 15 minutes
Hard dry time at 25° C .24 - 48 hours
Curing time in thicklayer 7 - 14 days.
Hardness 16 - 25 Shore A. Hness increases on ageing
Elongation more than 300%
Tensile strength 2-3 kg/cm2
Adhesion strength1 - 2 kg/cm
Coverage running meter per kg. of a sealant680
w.in mm x D. in mm
Benefits

  • One pack.

  • Waterbased easy to apply.

  • Non - toxic, nonflamable, hazardless.

  • Bonds to all building material.

  • Flexible.

  • Paitability.

  • Asthetic in colour.

  • Weather durable.

  • Withstand 10 0 C to + 800°C Climatic temperature.

  • Water resistat.

  • Resistant to household acids and alkalier, soaps.

DIRECTION FOR USE

SURFACR PREPARATION

The surface must be oil. grease and dust free. Clean the joint by wire brush. Remove dust by brush, compress air or water washing. The joint or crack must be dry.

PRIMER

Dilute same material with 25 - 30 % of water & apply as primer coat by brsh on jointing surfaces and crack. Allow it to dry completely.

CLEANING OF TOOLS

Clean the tools by water or soapwater immediately after use. Do not allow the material to dry.

STORAGE & SHELF LIFE

Shelf life is one year from the date of manufacture if stored in unopened containers at cool & dry place.

Packings

  • 1 & 5 Kg. plastic container.