Appearance and colour	Part I - Crystatine whitish grey powder. Part II - Syrupy white milky liquid.
Mixing Ratio	Part I : Part II 1:1 parts by weight
PH value of the mix	7-8
Viscosity of the mix	free flowing paste.
Application time at 30°C	Use the material within 1 hour of mixing.
Surface dry time at 30°C	1 - 2 hour of open air.
Hard dry time at 30°C	Within 24hours in open air.
Complete curing time at 30°C	3 days.
Coverage	20-24 sq. ft per 2 kg per coat.
Service temperature range	Not affected by cold and frost resists high temperature up to 80c.

END USES

UNIFLEX is suggested for waterproofing of building roof terraces where movements due to expansion & con- traction are expected. Waterproof coating for water retaining wall & water reservoir. Waterproofing of sea water channels and industrial gutters

DIRECTION FOR USE

SURFACE PREPARATION

Surface preparation is very important to get the best results and to avoid failure. The surface must be clean and free of grease, dirt, sludge, fungus cement coating blistered and loose plaster. It has the crack bridging ability so that it seals the cracks itself and no need of sealing with sealant. The substrate should be dampened with water prior to application of UNIFLEX Do not apply in rain

SEALER / PRIMER COAT

The concrete or cementitious substrates are highly porous. It is necessary to make the substrate less absorptive so that the top coats film thickness remains same. Krishna SEALER is highly elastomeric acrylic emulsion polymer without filled system has extra ordinary penetrating power which seals the porosity. Microcrevices of the substrate. It provides strong adhesion to the substrate and top coating. Due to nonfilled system it overcomes the problem of linear stress and strain created in the substrate. Apply one coat of SEALER as a primer coat by brush. Apply the top coat after one hour but within four hours of drying of SEALER coat.

APPLICAION

Apply the mixed material by hard brush or trowel to a given coverage level of 10-12 sq. ft. per kg. max to get
uniform film buildup. Single coat application is sufficient because you get 1.0 to 1.5 mm thicknes. Second coat application can be given if required.

CLEANING

Tools and equipment to be cleaned with water when the material is in uncured state.

STORAGE & SHELF LIFE

Store in cool and dry place. Shelf life of the unmixed material is one year from the date of manufactuere.

PACKING

10, 20, 70 kgs. duel packs.

PRECAUTION

• Do not apply over hot or dry substrate.


• Do not apply in rain.


• Do not dilute with water.


• Nonntoxic, but wearing of hand gloves & goggles is
  recommended.